Price: $48.99
(as of Sep 25, 2024 21:03:56 UTC – Details)
Product Parameters:
- Body material: Aluminum alloy
- Wheel material: Engineering plastic
- Wheel size: 85mm/3.3inch
- Appearance color: Silver
- Wheel color: Silver
- Input voltage: 12V
- Motor speed: 330rpm
- Servo: MG996R
Servo Parameters:
- Name: MG996R Servo
- Gear: Metal gear
- Size: 40.7*19.7*42.9mm/1.6*0.8*1.7inch
- Weight: 55g
- Product pull: 15kg/cm(6V)
- Working speed: 0.17sec/60 degrees (4.8V no load)
- Working speed: 0.13sec/60 degrees (6.0V no load)
- Stall torque: 9kg-cm (180.5 ounce-inch) at 4.8V
- Stall torque: 12kg-cm (208.3 ounce-inch) at 6V
- Working voltage: 4.8-7.2V
- Working temperature: 0℃ – 55℃
- Working dead zone: 5us (microseconds)
- Stearing gear angle: 180 degrees
- Three lines of servo connector: Yellow–Signal; Red–Positive(+); Browm–Negative(-)
Motor Parameters:
- Model: 33GB-520 DC Gear Motor
- Reated voltage: DC12V
- Suitable voltage: 6V-12V
- No-Load Speed: 170-350rpm
- No-load current: 100mA
- Motor Weight: 100g
85mm Rubber Wheel Parameters:
- Name: Robot trolley tire
- Color: Silver
- Outside diameter: 85mm/3.3inch
- Width: 31mm/1.2inch
- I.D.Hexagonal distance: 12mm/0.5inch
- Weight: 55g
- Material: The hub is made of reinforced nylon tires are premium rubber.
NOTE:
- In order to facilitate transportation, the product is not assembled.
- Size may vary by 2-3cm due to manual measurement.
- If you have any questions about this robotics platform, please feel free to contact us. We will get back to you within 24 hours.
- More documents can be downloaded at gitnova.com.
HIGH QUALITY ROBOTIC PLATFORM — The hub is made of reinforced nylon, which is very strong. The tires are made of high-quality rubber, with a large friction coefficient, very good load-bearing capacity and grip ability. The STM steering car model is very suitable for complex road conditions, such as sandy, hilly and other climbing off-road occasions. The rear wheel has a hall encoder for speed measurement and can get speed status and other feedback.
4WD CAR CHASSIS — Assembling this four drives robot chassis will help you improve your ability to operate the robot, and at the same time you can enjoy the fun of assembly. You can also understand the mechanical structure on the robot car chassis kit, including the frame, engine motor. The car adopts the rear wheel dual motor drive and the front wheel steering gear steering structure, and steering mechanism similar to professional racing car models.
AI ROBOT — AI is the hottest topic right now. Based on this basic robotics platform, you can learn more about artificial intelligence. Great for STEAM education. This STM robot car chassis kit is equipped with metal frame, which is not easy to break, strong and beautiful. The bottom plate greatly improves the strength of the body. MG996R servo is fast and perfect for running on flat groung.
ROBOTIC LEARNING — Controller is the core of the robotic car. Through this car chassis, you can learn the knowledge of robot controllers, such as arduino uno, raspberry pie, microbit, stm32 and many other main control boards. Plus, you’ll learn more about things like motor shield board and other sensors. This robot tank car chassis kit is very suitable for students DIY competition, science education, interest training, educational toys.
PACKAGE INCLUDED — Include 1set metal panel, 4pcs 85mm rubber wheels, 2pcs encoder DC motors, 1pc MG996R servo and 1 set screw kit. If you receive a package with missing accessories or encounter problems during assembly, please contact us for support.
